Joint Cover
| Product code | Size | Pack Quantity |
|---|---|---|
| CT30JCWH | 50 x 50mm | 1 |
| CT70JCWH | 100 x 50mm | 1 |
Request callback
Our dedicated Bendex sales team can offer support on orders and product advice. Enter your details below and we will call you back!
Other products in range
28 x 28mm |
54 x 28mm |
50 x 50mm |
75 x 50mm |
75 x 75mm |
100 x 100mm |
100 x 50mm |
150 x 150mm |
100 x 25mm |
|
|---|---|---|---|---|---|---|---|---|---|
Maxi Trunking
|
CT10WHPack Quantity: 10 x 3m |
CT20WHPack Quantity: 10 x 3m |
CT30WHPack Quantity: 6 x 3m |
CT40WHPack Quantity: 6 x 3m |
CT50WHPack Quantity: 6 x 3m |
CT60WHPack Quantity: 4 x 3m |
CT70WHPack Quantity: 4 x 3m |
CT80WHPack Quantity: 2 x 3m |
CT90WHPack Quantity: 6 x 3m |
Coupler
|
CT10CWHPack Quantity: 10 |
CT20CWHPack Quantity: 10 |
CT30CWHPack Quantity: 10 |
CT40CWHPack Quantity: 10 |
CT50CWHPack Quantity: 5 |
CT60CWHPack Quantity: 5 |
CT70CWHPack Quantity: 10 |
CT80CWHPack Quantity: 5 |
–
|
Joint Cover
|
–
|
–
|
CT30JCWHPack Quantity: 1 |
–
|
–
|
–
|
CT70JCWHPack Quantity: 1 |
–
|
–
|
End Cap
|
CT10ECWHPack Quantity: 10 |
CT20ECWHPack Quantity: 10 |
CT30ECWHPack Quantity: 10 |
CT40ECWHPack Quantity: 10 |
CT50ECWHPack Quantity: 10 |
CT60ECWHPack Quantity: 1 |
CT70ECWHPack Quantity: 1 |
CT80ECWHPack Quantity: 1 |
–
|
Internal Angle
|
CT10IAWHPack Quantity: 10 |
CT20IAWHPack Quantity: 10 |
CT30IAWHPack Quantity: 1 |
CT40IAWHPack Quantity: 1 |
CT50IAWHPack Quantity: 1 |
CT60IAWHPack Quantity: 1 |
CT70IAWHPack Quantity: 1 |
CT80IAWHPack Quantity: 1 |
CT90IAWHPack Quantity: 1 |
External Angle
|
CT10EAWHPack Quantity: 10 |
CT20EAWHPack Quantity: 10 |
CT30EAWHPack Quantity: 1 |
CT40EAWHPack Quantity: 1 |
CT50EAWHPack Quantity: 1 |
CT60EAWHPack Quantity: 1 |
CT70EAWHPack Quantity: 1 |
CT80EAWHPack Quantity: 1 |
–
|
Flat Angle
|
CT10FAWHPack Quantity: 10 |
CT20FAWHPack Quantity: 10 |
CT30FAWHPack Quantity: 1 |
CT40FAWHPack Quantity: 1 |
CT50FAWHPack Quantity: 1 |
CT60FAWHPack Quantity: 1 |
CT70FAWHPack Quantity: 1 |
CT80FAWHPack Quantity: 1 |
–
|
Flat Tee
|
CT10TWHPack Quantity: 10 |
CT20TWHPack Quantity: 10 |
CT30TWHPack Quantity: 1 |
CT40TWHPack Quantity: 1 |
CT50TWHPack Quantity: 1 |
CT60TWHPack Quantity: 1 |
CT70TWHPack Quantity: 1 |
CT80TWHPack Quantity: 1 |
–
|
Dividing Fillet
|
SFDF50WHPack Quantity: 10 x 3m |
SFDF50WHPack Quantity: 10 x 3m |
SFDF50WHPack Quantity: 10 x 3m |
SFDF50WHPack Quantity: 10 x 3m |
SFDF50WHPack Quantity: 10 x 3m |
SFDF50WHPack Quantity: 10 x 3m |
SFDF50WHPack Quantity: 10 x 3m |
SFDF50WHPack Quantity: 10 x 3m |
SFDF50WHPack Quantity: 10 x 3m |
Back Box – 1 Gang
|
CT70BB1WHPack Quantity: 20 |
CT70BB1WHPack Quantity: 20 |
CT70BB1WHPack Quantity: 20 |
CT70BB1WHPack Quantity: 20 |
CT70BB1WHPack Quantity: 20 |
CT70BB1WHPack Quantity: 20 |
CT70BB1WHPack Quantity: 20 |
CT70BB1WHPack Quantity: 20 |
CT70BB1WHPack Quantity: 20 |
Back Box – 2 Gang
|
CT70BB2WHPack Quantity: 10 |
CT70BB2WHPack Quantity: 10 |
CT70BB2WHPack Quantity: 10 |
CT70BB2WHPack Quantity: 10 |
CT70BB2WHPack Quantity: 10 |
CT70BB2WHPack Quantity: 10 |
CT70BB2WHPack Quantity: 10 |
CT70BB2WHPack Quantity: 10 |
CT70BB2WHPack Quantity: 10 |
Socket Plate – 1 Gang
|
SP1WHPack Quantity: 20 |
SP1WHPack Quantity: 20 |
SP1WHPack Quantity: 20 |
SP1WHPack Quantity: 20 |
SP1WHPack Quantity: 20 |
SP1WHPack Quantity: 20 |
SP1WHPack Quantity: 20 |
SP1WHPack Quantity: 20 |
SP1WHPack Quantity: 20 |
Socket Plate – 2 Gang
|
SP2WHPack Quantity: 20 |
SP2WHPack Quantity: 20 |
SP2WHPack Quantity: 20 |
SP2WHPack Quantity: 20 |
SP2WHPack Quantity: 20 |
SP2WHPack Quantity: 20 |
SP2WHPack Quantity: 20 |
SP2WHPack Quantity: 20 |
SP2WHPack Quantity: 20 |
28 x 28mm |
54 x 28mm |
50 x 50mm |
75 x 50mm |
75 x 75mm |
100 x 100mm |
100 x 50mm |
150 x 150mm |
100 x 25mm |
Technical specifications
Material
PVC-U is flame retardant and self-extinguishing. It provides a 100% recyclable material with good sustainability.
Expansion/Contraction
PVC-U expands and contracts at a uniform rate of approx 5.25mm in a 3 metre length for a temperature change of 25°C. Therefore, a 3mm gap between each length of trunking base is recommended.
Fittings allow for thermal expansion of the covers.
Fitting
• Secure trunking base in one plane only every 500mm by drilling alternate 6mm holes. Use roundhead screws.
• Avoid over-tightening to permit thermal movement.
• The use of plastic caps over screw heads is recommended to protect installed cables.
• To provide cable segregation, dividing fillets are fixed by adhesive tape to trunking base.
• To cut the trunking, use a fine-toothed panel or power jig-saw.
• External profile fittings overlap joints by up to 10mm to cover cutting inaccuracies.
• A variable angle jig-saw or chop saw is recommended for cutting 45° mitres.
Trunking lengths are connected using internal couplers as
follows:
Cement one end of the internal coupler to one base using adhesive solvent BXSC. Leave other end of coupler free in adjoining base to facilitate thermal movement.
Single Lengths
Where it is required to fit a single length of trunking (under 3 metres) between two inside walls and no accessory box is fitted, it is advisable to install a coupler in the centre of the run to facilitate the removal of the cover.
Joints & Bends
• Clip-on fittings and 2-part moulded flat angle: base must be mitred at 45˚ to ensure total enclosure of trunking, including any internal fitted segregator.
• Fabricated fittings: a 3mm gap between trunking base and bend or flat angle is recommended.
• External moulded fittings overlap the joints by up to 10mm to cover cutting inaccuracies.
• Maxi fabricated fittings are supplied with internal couplers (see Fitting).
• Secure end caps using solvent adhesive BXSC.
Covers
Covers are designed to limit unauthorised removal and to remain in position during normal conditions irrespective of impact and minor undulations of the mounting surface.
Covers Fitting
Covers are clipped into place from front. If accessory boxes are installed, the cover is butt-joined to the edge of the box. Cut edges of the cover are concealed by the accessory. For external
fitting couplers, the following gaps should be left between the two cover ends to permit the fitting to clip to base:
CT30 20mm
CT40 20mm
CT50 20mm
CT60 20mm
CT70 20mm
Covers Removal
To remove a cover, first detach a coupler or internal/external bend to gain access. The main cover can then be gently eased off the base.